How to disassemble and clean the metal honeycomb drain basket of the Washing And Drying Separate Twin Tub Washing Machine?

This Washing And Drying Separate Twin Tub Washing Machine from China Yangzi Group provides modern families with efficient, hygienic and convenient laundry solutions with its unique design and excellent functions. Among them, the design of the detachable metal honeycomb drain basket not only facilitates drainage, but also solves the problem of dripping after washing. This article will introduce in detail how to disassemble and clean the metal honeycomb drain basket of this washing machine.
1. Disassembly steps
Turn off the power: Before any disassembly operation, make sure that the washing machine has been turned off to avoid the risk of electric shock.
Empty the water tank: Open the drain port of the washing machine and completely drain the water in the water tank to ensure that no water overflows during the disassembly process.
Open the lid: Gently open the lid of the washing machine and find the location of the metal honeycomb drain basket.
Remove the drain basket: Hold the edge of the drain basket and gently lift it up to remove it from the washing machine. If you encounter resistance, you can gently shake the drain basket to loosen it before taking it out.
2. Cleaning steps
Preliminary rinse: Put the disassembled metal honeycomb drain basket into the sink and rinse it with clean water to remove dust and dirt on the surface.
Use detergent: Add an appropriate amount of detergent to the sink, soak the drain basket in the detergent solution, and let it stand for 10-15 minutes to allow the detergent to fully penetrate the dirt.
Scrub dirt: Use a soft brush or sponge to gently scrub the surface of the drain basket and the inside of the honeycomb structure to remove stubborn dirt. Be careful not to use a hard brush to avoid scratching the surface of the drain basket.
Rinse again: Rinse the drain basket thoroughly with clean water to ensure that there is no residual detergent.
Dry the drain basket: Place the cleaned drain basket in a ventilated place to dry, avoid direct sunlight to prevent deformation.
3. Reinstallation steps
Check the drain basket: Before reinstalling, check whether the drain basket has been completely dried to ensure that there are no water stains remaining.
Align the position: Align the drain basket with the installation position in the washing machine and gently put it in.
Fix the drain basket: Press the drain basket down gently to ensure that it is firmly installed in the washing machine. If you encounter resistance, you can gently shake the drain basket to align it with the installation position before pressing.
4. Precautions
During the disassembly and cleaning process, please pay attention to safety and avoid scratching or damaging the drain basket.
Do not use strong acid or strong alkaline detergents when cleaning to avoid corrosion of the drain basket.
When drying the drain basket, avoid direct sunlight to avoid deformation.
When reinstalling the drain basket, make sure it is firmly installed in the washing machine to avoid falling off during use.